IQOYA X/LINK-MPX – Support
IQOYA X/LINK-MPX is an IP codec designed for the transport of the analog or digital MPX signal from a studio to transmitters over IP networks. The MPX signal can be transported uncompressed or compressed. The support of µMPX compression is optional.
Firmware updates
IQOYA X/LINK-MPX firmware can be remotely updated from its WEB GUI. New firmware versions can be applied to units that are covered by a support and maintenance contract. Note that the subscription to the first level of support & maintenance contract (“Bronze” level) is free the first year as of date of purchase of the units.
Q&A
X/Link
How/where to find IQOYA X/LINK-LE's IP address?
If you don’t know the IP addresses of your IQOYA X/LINK-LE Eth ports and if you do not want to reset it to factory settings, here is how you can retrieve the IP addresses: Insert an empty, formatted SDHC card in the front panel SD card reader. Restart IQOYA by powering it OFF/ON. Remove the SDHC card once startup is completed, insert it in the SD card reader of a PC to read the ip_addresses.txt file.
What type of SD card can I use with the IQOYA X/LINK range?
IQOYA X/LINK supports any SDHC cards (max capacity 32 Gbytes). Please note that SDXC cards (>=64 Gbytes) are not supported.
Where can I find new firmware for the IQOYA range ?
IQOYA firmware are not directly available from our website. Our Tech support team or sales team will be happy to help you, get in touch with them here . You may however find the up to date firmware release notes from the support page of your IQOYA product on the Digigram WEB site.
Where can I find IQOYA user's manual ?
Go to the product web page and click onthe question mark. Then if you click on "Help" the user's manual will be downloaded in .pdf format.
What AES67/Ravenna profile is supported by IQOYA X/LINK codecs?
IQOYA X/LINK codecs support the standard AES67 compatibility profile: Linear 24-bit PCM, 48 kHz, 1 ms packet, one or 2 channels
